Clamshell 500*500mm UV Tape UV Curing Systems Reducing Blue Film Viscosity

UV tape have strong adhesive strength. Then, tape holds wafer strongly during wafer grinding process or wafer dicing process. On the other hand, adhesive strength becomes lower when UV(Ultraviolet light) is irradiated. So, wafer or chip is easily removed after UV irradiation.

Parameters:

Name: Customized UV Tape UV Curing Systems

Type: DSXUV-500500

Driving: 100-240V 50-60Hz

Color: white, blue

Power: 7000W

Outside dimension: 925*650*975mm

Irradiation Area: 500*500mm

Function: adjusting time and power (1-100%)

Wavelength: 365nm

Irradiation head: it shines from the top down

Cooling method: air cooling

Application: reducing the viscosity of UV film / blue film, facilitating the use of the wafer chip in the next operation

Application :

Suitable for optical lens, LED, IC, semiconductor, integrated circuit board, mobile hard disk and other semiconductor materials, glass filter and others UV film curing, UV tape curing. UV Tape Curing Machine is a UV film and cutting film adhesive tape viscosity reduction and viscosity relief of automatic curing equipment. For materials such as wafers and glass, UV TAPE adhesive is used on 8’’, 12’’, and 15’’ bracket fixture curing device, which has high efficiency curing ability and can quickly reduce the viscosity of UV TAPE on materials and parts.

Characteristics of UV Tape UV Curing Machine :

1.Small body, suitable for 6/8/10/12 inches irradiation

2.Adjustable time and brightness, touch screen operation, simple and convenient

3.Bottom-up irradiation, easy to place the wafer

4.LED cold light source, environmental protection products, with low temperature, uniform exposure, compact structure, small energy consumption, is the ideal model in semiconductor industry, and low temperature no damage to thermally sensitive materials.

5.The service life is more than 10 times longer than ordinary mercury lamp, continuous service life 15000-30000 hours.

6.Zero maintenance cost, no need to replace the illuminant parts for long-term work.

7.Closed light source design, no UV side leakage, no damage to the human body

8.Fast degumming, a few seconds can be degumming, reducing the viscosity of UV film or blue film