Semiconductor Wafer Chip UV LED Curing System UV Blue Film Glue Remover Filled With Nitrogen Gas UV Curing System The Advantages of Nitrogen Wafer UV LED Curing System: Improve  efficiency: Nitrogen can eliminate other interfering gases such as oxygen and water vapor, which may reduce the energy of ultraviolet radiation and thus decrease the UV debonding efficiency. Environmental protection a...

Wafer Film laminator machine is a widely used equipment in industries such as electronics, communication, and semiconductor. It is mainly used to stick protective or explosion-proof films, ensuring that there are no bubbles or scratches during the film sticking process. The working principle of the film wafer mounter machine mainly includes the following steps: Preparation: Install the roll shaped...

How do you know if your product is suitable for using Plasma Cleaning Machine? Plasma cleaning machine is used in what field? This is not difficult. Based on widespread use of plasma cleaning machine in all kinds of life, www.leduvcuring.com gives you a summary of plasma processor machine in eight applications and solutions : 1.Surface cleaning solution In the vacuum plasma chamber, high energy di...

Advantages and limitations of UV curing system in the printing industry in recent years, the industry has developed LED UV light source, because of lower energy consumption, curing efficiency is higher, and the supporting LED UV ink composed of LED UV curing technology is becoming printing enterprises to achieve energy saving and environmental protection “new favorite”. 1.Advantages : A.Lower ener...

Wafer Expander System is a device used in the semiconductor industry to mechanically stretch the diameter of silicon chips. This process is called wafer expansion or wafer stretching. After the crystal cutting is completed, the spacing is very small and cannot be directly removed from the blue film or UV film. At this point, an wafer expansion machine is needed to increase the wafer size, such as:...

The core purpose of introducing nitrogen (inert gas environment) in the UV curing process is to eliminate the interference of oxygen to the curing reaction, thus significantly improving the curing efficiency, material performance and product yield. The following are the specific reasons and mechanisms of action: 1. Solve the problem of oxygen polymer resistance (Oxygen Inhibition): The free radica...

Main Types of Mainly Products : UV 310nm, UV 365nm, UV 375nm, UV 385nm, UV 395nm, UV 405nm, UV 415nm, UV 420nm, Deep UV LED 265nm or 275nm UV LED Packing Size : 335, 4040, 4545, 5050, 6363, 6868, 7070, etc. Business Brand : Japan NICHIA (NCSU033B 、NCSU276A、NCSU033C、NVSU233A、NVSU233A-D1、NVSU233B、NC4U133A、NC4U133B, and maximum power - 365nm NVSU...

There are three American EIT energy meters that have undergone the latest calibration by the original factory. One is the POWER PUCK for measuring mercury lamps, one is for measuring 395nm for LEDs, and the other is for measuring the 405nm band. So let's put these three meters in the mercury lamp at the same time, in the same position, for time and speed, and compare the data. As shown in the figu...