Categories

contact us

uvcure@uvspacelight.com
live:1651063690jennifer
+8618924372460
0086-18924372460
Shenzhen Deshengxing Electronics Co., Ltd.

New Products

Small Wafer Nitrogen UV Curing System Tape LED UV Curing Box
Nitrogen UV Curing System Tape Led,Compact and Practical UV Curing system, 5 seconds for The Film to Detach from The Wafer, Adjustable Time, Adjustable illumination, Nitrogen Protection
Wafer UV Curing System LED Tape UV Curing Machine Semiconductor Ceramic Substrate Square
Illumination can be adjusted, Time can be adjusted, Even Curing, 5 seconds Curing,Compatible with multiple sizes
6 inch 8 inch Semi-automatic LED Wafer Expander Machine
Equipped with nitrogen support rod, clamshell labor-saving function; Adjust the height of the working plate to rise, you can adjust the spacing between the DIE; Using the motor lifting and cylinder lifting to complete the membrane expansion process, to ensure the consistency of the membrane expansion;
DSXUV 12inch Semi-automatic Wafer Mounter Film Sticking Machine
This equipment (lamator) is mainly used for 12 inch Si wafer BG film coating. No burrs, no bubbles. The wafer type is dummy wafer. This semi-automatic film sticking machine is suitable for applying film to products such as wafers, semiconductors, ceramics, and glass. It is a device used for film coating processing, specifically designed to precisely adhere thin film materials to the surface of wafers. It combines the characteristics of manual operation and automatic control, providing higher film application accuracy and efficiency while maintaining operational convenience.
Manual Wafer Film Separator Silicon Stripping Machine
This film tearing machine is used to remove the protective tape on the surface of wafers after thinning or etching processes. The device can be used for film tearing on 4 ", 5", 6 ", 8", and 12 "wafers.

200x100mm Vertical Table LED UV Curing Machine for Screen Printing

200x100mm Vertical Table LED UV Curing Machine for Screen Printing

Vertical Table LED UV Curing Machine The UV spectrum wavelength is 365nm. The effective curing area is 200X100mm, which supports external signal input and triggering.

model no. :
200x100mm UV Conveyor
Brand:
DSXUV
port of dispatch :
SHENZHEN
Payment :
T/T 100% Before Shipment
original region :
CHINA

contact now

Product Details

200x100mm Vertical Table LED UV Curing Machine for Screen Printing The curing device is simple, easy to maintain, and the equipment associated with it is generally smaller than traditional coating equipment, and the equipment investment is low. Coating equipment failure is low, because UV coating does not have ultraviolet radiation will not cure, so will not clog and corrode equipment, coating tool and pipeline cleaning convenient, equipment failure rate is low.

Specification Sheet

wavelength: 365nm

Model: DSX-S200-200X100-365

Electric power: 600W

Optical power density: 1000MW/CM2

Irradiation area: 200X100mm

Irradiation height: 20mm

Cooling method: Air cooled

Overall size: L1500mm*W570mm*H1080mm

Product Overview

UVLED curing machine, replacing traditional mercury lamp, built-in UVLED curing light source, low temperature, no ozone, no deep ultraviolet, low energy consumption, high efficiency, no infrared radiation, cold light source, suitable for curing of various heat sensitive materials UV glue, infrared Sensing intelligent control, start and stop control on demand.

Advantage :

1.Extra-long life: 25000h~30000h

2.Energy saving: save 80% electrical energy than Mercury lamp

3.UV output adjustable: from 1% to 100%

4.Multiple control modes: constant current, peal control, intelligent optical and manual modes

5.Photoelectric induction, instant on/off, no preheating required.

Table Conveyor Belt UV LED Curing Machine

Automatic UV Curing Equipment for Coating

Previous Next

GET STARTED

You can contact us any way that is convenient for you. We are available 24/7 via, email or telephone.