Flexible 270nm UVC LED Sterilization Lamp for Disinfection

Germicidal 270nm UV LED Strip introduction: Germicidal UVC LED strip for Sterilization & Disinfection UV strip light Product parameters: UVC LED tape features: germicidal 270nm UVC strip light can damage DNA, destroying harmful micro-organisms in other liquids, on surfaces, on food...

Parameters :

Brand : DSXUV

Size : 8mm

Type of LED : UVA+UVC 3535 UV LED Light Bead

Quantity of LED : 30pcs

Voltage : 12V

Power : 4W

Rated current : 30mA

Effect range : distance from the lamp belt is 50mm

Sterilizing rate : 99%

Working temperature : -30~60℃

Deep Ultraviolet UVA+UVC lamp belt application field :

1. Pet environment, medical equipment, house disinfection, pharmaceutical manufacturing, laboratory

2. sterilization of baby products, disinfection of medical equipment, drinking water disinfection, food preservation, surface sterilization, aquatic animals sterilization, whole house disinfection, air sterilization, sterilization of articles for daily use, coin sterilization, ultraviolet phototherapy, ultraviolet detection, etc..

Identification of Lamp Tape :

1. Using 3535 UVC LED light beads

Quartz glass lens is adopted to improve UVC irradiation rate. High light efficiency, high temperature resistance, anti-attenuation, high current impact resistance, high thermal conductivity, antistatic protection.

2. Uniformity of resistance

Good resistance can ensure that the current is uniform, the resistance of the lamp belt distribution is uniform and dense. There is an average resistance between each lamp bead. If there is a bad point, only the broken lamp bead is not bright, will not affect the use of the whole lamp belt.

3. Copper plate / copper wire

The use of high quality copper plate copper wire materials on the market, with oxidation resistance, protection of electrical conductivity, prolong the service life of the lamp belt.

4. The width of copper plate is 8mm

The width of the copper plate determines the quality. The width of the copper plate with the 3535 UVC LED lamp is up to 8mm, and the width of the copper plate can determine whether it can withstand greater unstable voltage.

5 Welding

Manual welding to improve the fastness and electrical conductivity of the circuit board. Reduce false welding, leakage welding, for the efficient use of products laid a solid foundation.

6. Shear

When the whole volume is not needed, cut it from the shear to reduce unnecessary waste.

7. Resistance

Adopt SMT type resistance and unique arrangement mode, control the current flow to a greater extent, and better protect the luminescent element.

The Advantages of UVC LED Soft Light Strip

1.Softness

UVC LED soft light strip uses very soft  material as the substrate, can be bent arbitrarily without breaking, easy to shape, suitable for various modeling needs.

2.Super energy-saving

The power of UVC LED soft bar 1210 is only 4.8W per meter. The power of the LED soft bar 5050 is 7.2W/m. Compared with traditional lighting and decorative lamps, the power is several times lower, but the effect is much better.

3.Environmental protection

Whether LED or FPC, UVC LED soft light strips are made of environmentally friendly materials, which can be recycled and will not cause pollution and damage to the environment due to extensive use.

4.Safety

The UVC LED soft light strip uses the low-voltage DC 12V power supply voltage, so it is very safe to use. No matter the elderly, children can be safety used without causing safety hazards.

5.Simply and easy to install

UVC LED soft light strip installation is very simple. Equipped with fixed clamps, wire slots, iron wire, iron mesh can be installed on a variety of support surfaces. In addition, as UVC LED soft light strip is light and thin, double-sided adhesive tape can also be used to achieve the fixed function, which can be installed without professional personal.

6.Wide range of applications

UVC LED soft light strip is widely used in medical places and public health because of its soft and light characteristics.