-
2018-04-13
UV, the abbreviation of Ultraviolet Rays, invisible to the naked eye, is an electromagnetic outside of the violet light. The range of wavelength is 10~400nm. Generally speaking, according to its natur...
continue reading
-
2018-05-18
Ultraviolet Closed Tunnel Furnace, like microwave over, Cover up all around, can not see ultraviolet light. The product that need solodify is put in inside to cure. Here are two products to recommend ...
continue reading
-
2018-07-20
1.Working UV LED low current thermal characteristics, LED temperature is not obvious. If the ambient temperature is high, the main wavelength of UV will be redder, the brightness will decrease and be ...
continue reading
-
2019-01-04
The Advantages of UV LED: Since 2014, most domestic manufacturers still use the traditional UV mercury lamp to work, but UV Light Source will eventually replace the mercury lamp, because its advantage...
continue reading
-
2019-01-10
UV LED or Ultraviolet Light Emitting Diodes, are semiconductor devices that directly convert electrical energy into ultraviolet light. Working temperature is usually below 100℃, with long service life...
continue reading
-
2019-05-29
1.The limitations of photo-initiators, thinking in terms of system, resins, monomers From the introduction of LED, it can be seen that the current high power LED light source suitable for industrial p...
continue reading
-
2019-10-18
Ultraviolet (UV) curing is a process of photo-polymerization that converts liquid into solid by using ultraviolet energy. After absorbing the UV energy, the photo-initiator (PI) produces free radicals...
continue reading
-
2020-02-17
UV LED technology is more and more close to our daily life, which can be used to reduce bacteria and improve health. With the development of technology, the application forms of UVC UV LED Sterilizati...
continue reading
-
2021-01-29
1.Definition of UV glue UV glue, as known as UV curable adhesive, shadowless adhesive, UV light curable adhesive, is a single component, low viscosity, high strength acrylate adhesive. It has the char...
continue reading
-
2021-03-05
NICHIA Corporation (Headquarters: Anan City, Tokushima; President: Hiroyoshi Ogawa; hereinafter “Nichia”) announces confirmation through experimentation of the inactivation effect (99.99%) of NICHIA’s...
continue reading
-
2021-03-26
1.When the product is heated during welding, it may cause the moisture absorbed in the package to evaporate and expand, thus causing the interface of the outer package to crack and affecting the optic...
continue reading
-
2021-04-30
Before the chips scribing, the wafer is fixed to the frame with scribing film. After the scratching process is completed, UV light is used to irradiate the fixed film to make the UV film solidify and ...
continue reading