1.UV Glue Curing Machine : UV ultraviolet ray distribution will produce a lot of heat, the temperature continues to rise. The light curing machine above the ultraviolet lamp exhaust device and through the ventilation tube in the curing process of the ozone generated from the room, so as to achieve the goal of cooling. When the substrate is too thin or the temperature is too low, a lightweight is r...

UV LED spot light source uses high energy 365nm UV LED light source. Previous ultra-high pressure mercury lamp light irradiation is different from pure ultraviolet light source, cannot produce infrared ray. UV LED light source can be used within 5-8 years. It do not need to replace any components. Compared with traditional UV cameras, it saves more than 10,000 yuan per year. Then, in the packing o...

UV LED has another advantages, that is, it has widely adaptation. It is suitable for all kinds of materials, such as UV LED curing glue. The performance of UV glue adaptive wide edge is suitable not only for automatic production line, but also for semi-automatic line. In general, as long as the current production line with UV curing equipment and the corresponding assembly tools to modify a little...

UV LED curing system is fast speed, low temperature, safety and environmental protection, good film forming performance, can solved many problems in the process of printing gloss treatment and fill many shortcomings of traditional polishing. 1)The standard of UV safety and environmental protection should be light oil without solvent oil, which solid content is 100%. That is, from the light into an...

The biggest difference between water-based ink and solvent-based ink that water-based ink uses water instead of organic solvents, which significantly reduces VOC emissions, does not effect the health of human body, is not easy to burn. The UV ink is stable. The color is bright. The plate is not corroded. The operation is simple. The price is cheap. After printing, the adhesion is good. The water r...

UV LED 1.Low UV: 250nm-265nm-285nm-365nm. Now, it has reached 250nm-410nm. Both of them are INGaN/GaN material carbide. The UV rays can kill all bacteria in the water, which the lethality can reach 98%, especially 285nm. 2.Mid UV: 365nm-370nm. Both of them accord with international standard. UV has kill-ability. In general, doctors are required with no bacteria when they operate. The UV of 365nm-3...

LED bulb can develop visible and invisible light by adjusting the chip wavelength. For UV LED, because its overall cost is low, becomes one of the development drivers of ultraviolet lamps. According to the estimation of industry experts, composition annual rate of growth of ultraviolet light market, between 2017~2021, will reach 13.32%. Traditional ultraviolet lamps has the limits of space and lig...

Ultraviolet radiation curing technology is an entirely new green technology developed since the 1970s. It is used to produce UV curing coatings, or UV coatings. With non-volatile organic compounds (VOC), small environmental pollution, fast curing speed, energy saving, good performance of cured products, suitable for high speed automatic production and other advantages. However, traditional coating...