UV LED 365-SJ4028-6K Portable Rechargeable Fluorescent Inspection Light is using original imported NICHIA UV LED light source.
model no. :
UV Blacklight FlashlightBrand:
DSXUVport of dispatch :
SHENZHENPayment :
T/T 100% Before Shipmentoriginal region :
CHINAUV LED 365-SJ4028-6k Large Focal Length UV Black Light Torch is using original imported NICHIA UV LED light source, usually used for fluorescent inspection.
Parameters of Large Focal Length UV Black Light :
Item |
Parameters / Method |
Type |
Hand-held |
UV-FLUX RT 25℃, calibration at 380mm |
6000 μW / cm2 |
The white light levels |
≤20 Lux |
Calibration at 380mm cover area |
Diameter 300mm |
FLUX Error |
0 - 40 ℃ ±10% |
Light distribution characteristics |
Center for light distribution |
Power supply |
AC 100 - 240V 50 / 60 Hz |
Power |
UV LED - 12VA |
Wavelength |
RT 25℃, 365nm ± 3nm (UVA) |
Outside dimension |
160mm(W)*75mm(D)*170mm(H) |
Weight |
750g |
Battery capacity |
6800mA/H 126V |
Charging time |
3-4 H |
Battery life (cumulative time) |
UV LED 5 - 6 H |
Outside Dimension of Hand-held Bright Light Flashlight : (unit : mm)
Characteristics of Leduvcuring Ultraviolet Black Light :
1.Original imported NICHIA UV LED light source
2.Zero UV-B
3.5-6 hours battery life
4.The battery uses 6800mA large capacity lithium battery.
5.Including battery, total weight is 750g
6.Continuous working surface temperature rise <8K (8℃)
7.With color filter glass, with color filter function
8.White light content below 20 LUX
UV Irradiance Intensity Profile (381mm) of Large Area Irradiation UV Black Light Torch :
Portable High Power UV Blacklight Flashlight is suitable for NDT detection, defatting detection, detection of medical raw materials, etc..
UV Wafer Tape Curing System solves the curing process of wafer, glass and ceramic cutting technology, which is not only limited to semiconductor packaging industry, but also applicable to UV film curing of optical lens, LED, IC, semiconductor, integrated circuit board, mobile hard disk and other semiconductor materials.
UV LED circuit board free drawings, fast proofing, SMT welding processing, UV LED chip welding.
The product of Short-Wave Deep UV Illumination Meter is exclusively used in detecting ultraviolet UVC wave spectrum irradiation value.
This type of 16mm Printed Circuit Board is suitable for 2835 LED light beads.
NVSU333A UV-LED is widely used in high precision curing, ink curing (printing), bill checker etc. It's also the best way to solidify UV glue.