-
2018-09-14
In the past, UV light source were widely in the printing industry, such as high pressure mercury lamps and metal halide lamps. Due to the large size lighting and power equipment, users are concerned a...
continue reading
-
2018-10-12
Solidification technology is the most commonly used technology in industrial applications. In the process of the development of industrial technology, the technology of UV light curing is also progres...
continue reading
-
2018-11-09
Material and Advantages : 1.Long Service Life Only 800 - 3,000 hours of mercury life, the life of UV LED photo-curing machine system is 20,000 - 30,000 hours. According to DUIY = 1/5 (preparation time...
continue reading
-
2018-12-20
In 1877, the first report on the ability of solar radiation to kill bacteria in the medium opened the prelude to the research and application of UV disinfection. In 1901, mercury lamps began to be use...
continue reading
-
2019-01-04
The Advantages of UV LED: Since 2014, most domestic manufacturers still use the traditional UV mercury lamp to work, but UV Light Source will eventually replace the mercury lamp, because its advantage...
continue reading
-
2019-01-10
UV LED or Ultraviolet Light Emitting Diodes, are semiconductor devices that directly convert electrical energy into ultraviolet light. Working temperature is usually below 100℃, with long service life...
continue reading
-
2019-03-16
UV LED Curing Accessories uses UV LED chip as the light source, and various control modes are controlled by the controller. The electrical signal is converted into optical signal, and a single ul...
continue reading
-
2019-03-26
There are many specifications for UV Curing Equipment. How can I know which UV Light Source UV Curing Equipment I need ? How to select the suitable UV LED Spot Light Source? Linear UV Light Source? La...
continue reading
-
2019-05-25
Mercury lamps have been developed and used very well, so er have traditionally regarded mercury lamps as standard light sources. However, the development of ultraviolet LED has just started, and the f...
continue reading
-
2019-05-29
1.The limitations of photo-initiators, thinking in terms of system, resins, monomers From the introduction of LED, it can be seen that the current high power LED light source suitable for industrial p...
continue reading
-
2019-06-26
In the past two years, due to the shortage of photo-initiator caused by environmental protection storm and the soaring price, the downstream enterprises have felt the personal pain and greatly restric...
continue reading
-
2019-10-18
Ultraviolet (UV) curing is a process of photo-polymerization that converts liquid into solid by using ultraviolet energy. After absorbing the UV energy, the photo-initiator (PI) produces free radicals...
continue reading