6 inches 3D Printer LED Light Source Module is designed for aspheric surface, ultra-precision machining, widely used in the field of 3D printing
model no. :
405nm LED Optical Lens ModuleBrand:
DSXUVport of dispatch :
ShenzhenPayment :
T/T 100% before shipmentoriginal region :
China405nm LED Light 3D Parallel Array Module Lens is designed for aspheric surface, ultra-precision machining, processing accuracy of lens than 1um, high transmittance, UV resistance, the product is widely used in the field of 3D printing.
Power of UV LED: 3W/pcs, 4*6=24pcs,
Total Power: 24*3=72W
Wavelength: 405nm, customized
Angle: collimation: 3.5 degrees
Uniformity: 90%
Introduction of parallel light
1. Parallel light source is normally used for high precision measurements
2. Parallel light has a very high contrast at the edge.
3. It reduces diffuse reflection, which is good for image boundary recognition
Other:
Product is not suitable to use in following conditions;
—-Direct or indirect wet / damp conditions, such as rain, etc;
—-in contact with sea water and erosive materials;
—-Exposed to corrosive gases (e.g., Cl2, H2S, NH3, SOx, NOx, etc.);
—-Exposed to dust, liquids or oils;
This 3D Parallel Array Module Lens is widely used in the field of 3D printing industry, high transmittance, UV resistance.
This 3D Printing Light Source Module Lens is widely used in the field of 3D printing.
Parallel 405nm UV Light Source Module Lens is widely used in the field of 3D printing
Product name: 12 inch 13 slot wafer basket Product Code:DSXUV-24G12-000-R1 Product process: Precision machining/ordinary oxidized black
NVSU333A UV-LED is widely used in high precision curing, ink curing (printing), bill checker etc. It's also the best way to solidify UV glue.
Jet Type AP Plasma Processing System FURY-APO-DP1010-A is mainly used in the front processing of mobile phone case printing, coating and dispensing, as well as the surface treatment of mobile phone screen.