Parallel 405nm UV Light Source Module Lens is widely used in the field of 3D printing
model no. :
3D Printer UV Curing LampBrand:
DSXUVport of dispatch :
ShenzhenPayment :
T/T 100% before shipmentoriginal region :
China13.3 inches 405nm UV LED Curing Module is designed for aspheric surface, ultra-precision machining, processing accuracy of lens than 1um, high transmittance, UV resistance, the product is widely used in the field of 3D printing.
Parameters :
Name: 3D Printer Complex Lens UV Light Source
Power of UV LED: 3W/pcs, 7*13=91pcs,
Total Power: 91*3=273W
Wavelength: 405nm, customized
Angle: collimation: 3.5 degrees
Uniformity: 90%
Material: PMMA
Luminousness: 93%
Outside Dimension: 312*168mm
Introduction of parallel UV light:
1. Parallel light source is normally used for high precision measurements
2. Parallel light has a very high contrast at the edge.
3. It reduces diffuse reflection, which is good for image boundary recognition
Other:
Product is not suitable to use in following conditions;
—-Direct or indirect wet / damp conditions, such as rain, etc;
—-in contact with sea water and erosive materials;
—-Exposed to corrosive gases (e.g., Cl2, H2S, NH3, SOx, NOx, etc.);
—-Exposed to dust, liquids or oils;
This 3D Parallel Array Module Lens is widely used in the field of 3D printing industry, high transmittance, UV resistance.
This 3D Printing Light Source Module Lens is widely used in the field of 3D printing.
6 inches 3D Printer LED Light Source Module is designed for aspheric surface, ultra-precision machining, widely used in the field of 3D printing
NICHIA UV LED NCSU033C U365nm is Pb-free reflow Soldering application, built-in EDS protection Device, RoHS compliant.
UV-MINI UV Energy Meter is a high quality energy meter, is used to measure the different light source of UV energy.
10mW UVC Ultraviolet LED has the advantages of high reliability, low thermal resistance, light Angle adjustable, and so on.