-
2018-05-08
As electron component, Light Emitting Diode-LED has appeared more than 40 years. But for a long time, limited by luminous efficiency and brightness, Light Emitting Diode-LED has being a indicator ligh...
continue reading
-
2018-05-18
Ultraviolet Closed Tunnel Furnace, like microwave over, Cover up all around, can not see ultraviolet light. The product that need solodify is put in inside to cure. Here are two products to recommend ...
continue reading
-
2018-05-28
The facility of Original Light Emitting Diode (OLED) is more and more popular, called for “future display”. Compared with liquid LED, OLED display has easier structure, higher power efficiency, thinne...
continue reading
-
2018-05-31
1.Spectrum At present, the surface curing used in the the market is mainly the peak wavelength spectrum of 365nm and 395nm. What kind of spectrum is required to achieve the best results, which need to...
continue reading
-
2018-06-15
(1)Quick reaction time. UV LED lights do not need to be preheated and you can improve productivity immediately after printing. (2)High security UV LED lights is without UVC light, no ozone release, no...
continue reading
-
2018-06-22
UV LED Linear Light source has High power irradiation area, saving, environmental protection, fast drying. 1.Different solvents, the light-curing ink dilution monomer is involved in the chemical react...
continue reading
-
2018-06-27
UV LED is a new kind of energy, is widely used in all walks of life, replace traditional mercury lamp. The former has more advantages than the latter. Light intensity, uniform service life, the most i...
continue reading
-
2018-07-06
1.UV LED Exposure Machine is through optical lens outputting long and narrow UV band, to meet the edge, printing and other production needs. The properties of the line light source are the same as tha...
continue reading
-
2018-07-11
1.According to the difference of the substrate, coating, curing distance and so on, UV LED adjust the curing speed. Curing speed is too fast, UV LED substrate surface UV print sticky or surface dry an...
continue reading
-
2018-07-20
1.Working UV LED low current thermal characteristics, LED temperature is not obvious. If the ambient temperature is high, the main wavelength of UV will be redder, the brightness will decrease and be ...
continue reading
-
2018-08-03
Principle and characteristics of semiconductor UV LED photocuring machine : 1.Energy saving, cost reduction. When the light reaches a certain brightness due to the exposure of semiconductor of UV LED,...
continue reading
-
2018-08-10
1.The UV light curing lamp has low thermal radiation, uses the luminescent element UV LED, pure ultraviolet spectral wavelength, no infrared emission, so the surface of the product does not increase t...
continue reading