-
2019-03-26
There are many specifications for UV Curing Equipment. How can I know which UV Light Source UV Curing Equipment I need ? How to select the suitable UV LED Spot Light Source? Linear UV Light Source? La...
continue reading
-
2019-05-25
Mercury lamps have been developed and used very well, so er have traditionally regarded mercury lamps as standard light sources. However, the development of ultraviolet LED has just started, and the f...
continue reading
-
2019-05-29
1.The limitations of photo-initiators, thinking in terms of system, resins, monomers From the introduction of LED, it can be seen that the current high power LED light source suitable for industrial p...
continue reading
-
2019-06-26
In the past two years, due to the shortage of photo-initiator caused by environmental protection storm and the soaring price, the downstream enterprises have felt the personal pain and greatly restric...
continue reading
-
2019-10-18
Ultraviolet (UV) curing is a process of photo-polymerization that converts liquid into solid by using ultraviolet energy. After absorbing the UV energy, the photo-initiator (PI) produces free radicals...
continue reading
-
2020-02-17
UV LED technology is more and more close to our daily life, which can be used to reduce bacteria and improve health. With the development of technology, the application forms of UVC UV LED Sterilizati...
continue reading
-
2020-09-04
Surface Disinfection of Article 1.Killing a general bacteria propagators : irradiation dose shall be up to 10000uW.s/cm2 2.Bacterial spores killing : reach 100000W.s/cm2 3.Killing viruses : intermedia...
continue reading
-
2020-12-11
In order to better serve our users, we have been carefully summing up the experience values and integrated some common problems of different brands of UV meters. 1.A common name in the market : Common...
continue reading
-
2021-01-29
1.Definition of UV glue UV glue, as known as UV curable adhesive, shadowless adhesive, UV light curable adhesive, is a single component, low viscosity, high strength acrylate adhesive. It has the char...
continue reading
-
2021-03-05
NICHIA Corporation (Headquarters: Anan City, Tokushima; President: Hiroyoshi Ogawa; hereinafter “Nichia”) announces confirmation through experimentation of the inactivation effect (99.99%) of NICHIA’s...
continue reading
-
2021-03-26
1.When the product is heated during welding, it may cause the moisture absorbed in the package to evaporate and expand, thus causing the interface of the outer package to crack and affecting the optic...
continue reading
-
2021-04-30
Before the chips scribing, the wafer is fixed to the frame with scribing film. After the scratching process is completed, UV light is used to irradiate the fixed film to make the UV film solidify and ...
continue reading