How do you know if your product is suitable for using Plasma Cleaning Machine? Plasma cleaning machine is used in what field? This is not difficult. Based on widespread use of plasma cleaning machine in all kinds of life, www.leduvcuring.com gives you a summary of plasma processor machine in eight applications and solutions :

1.Surface cleaning solution

In the vacuum plasma chamber, high energy disordered plasma is generated by the RF power supply under a certain pressure, and the surface of the product is cleaned by the plasma bombardment, so as to achieve the purpose of cleaning.

2.Surface activation solution

The surface energy, hydrophilicity, adhesion are enhanced by plasma surface treatment.

3.Surface etching solution

The material surface is selectively etched by by relative gas plasma, the etched material is converted into gas phase and discharged by vacuum pump, and the micro-specific surface area of the treated material is increased with good hydrophilicity.

4.Nanometer coating solutions

After treatment by the plasma cleaning machine, the plasma-guided polymerization formed the nanometer coating. All kinds of materials through the surface coating, to achieve hydrophobic, hydrophilic, anti-fat, anti-oil.

5.PCB manufacturing solution

In fact, this also involves the process of plasma etching. The PBC is achieved by plasma bombardment on the surface of the object to remove the surface colloid. PCB manufacturers use the etching system of the plasma cleaner for decontamination and etching to remove the insulation from the borehole and ultimately improve product quality.

6.Semiconductor / LED solution

The application of plasma in semiconductor industry is based on various components and wires of integrated circuit. Then in the process is easy to appear dust, or organic pollutants, it is extremely easy to cause damage to chip, make it short circuit. In order to eliminate the process of problem, in subsequent process in the process of import plasma surface treatment machine equipment for pretreatment, using plasma surface treatment machine is in order to better protect our product, without any damage on the surface of the wafer performance down to good use plasma equipment to remove surface impurities and organic materials, etc.

In the process of epoxy glue injection for LED, pollutants will lead to high bubble formation rate, resulting in low product quality and service life. Therefore, it is also a matter of concern to avoid bubble formation in the process of glue sealing. After RF plasma cleaning, the chip and surface will be more closely combined with the gel, the formation of bubbles will be greatly reduced, and the heat dissipation rate and light emission rate will be significantly improved. Apply plasma cleaner to metal surface to remove oil and clean.

7.TSP/OLED solution

This is referred to the advantages of plasma cleaning function, TSP aspects : touch screen cleaning of the main process, improve the OCA/OCR, laminating, ACF, AR/AF coating process on bonding strength / force, to remove air bubble / foreign materials, through a variety of the use of atmospheric pressure plasma form, can be all kind of glass and film by the atmospheric pressure plasma discharge of uniform surface without damage.

8.Vacuum plasma spraying solution

due to the high energy density in vacuum plasma, all power material with stable molten phase can actually be transformed into a dense and firmly attached spray layer. The quality of the spray layer is determined by the melting degree of spray powder particles at the moment of hitting the surface of work-piece.

Principle of Plasma Surface Treatment :

plasma surface treatment also known as plasma cleaning machine, is a new high-tech technology, using plasma to achieve conventional cleaning methods can not achieve the results. Plasma is a state of matter, also known as the fourth state of matter, is not a common solid liquid gas three states. A gas becomes a plasma when enough energy is applied to separate it. The “active” components of plasma include ions, electrons, atoms, active groups, excited nuclides (meta-stable state), photons, etc. Plasma cleaning machine is to use the properties of these active components to treat the surface of the sample, so as to achieve the purpose of cleaning, coating.

Why use a plasma cleaner?

If you’re stilling cleaning your product by buying lots of sulphuric acid and other chemicals, it’s not environmentally friendly and the cost is expensive. So, the plasma cleaning machine is the best way to replace the traditional chemical cleaning method. And the cost of plasma cleaning machine is low, long service life. Take pen manufacturers as an example, the traditional way of cleaning ABS material pen tongue uses a lot of corrosive chemicals, which costs CN￥400,000.00 per year. However, the use of plasma processing, a one-time purchase price of about CN￥100,000 can be used for many yeas. And chemicals are banned by governments of all countries and are not environmentally friendly. We suggest you buy our plasma cleaning machine as soon as possible to save costs.